diff options
Diffstat (limited to 'freetype/src/autofit/aflatin2.c')
-rw-r--r-- | freetype/src/autofit/aflatin2.c | 2428 |
1 files changed, 0 insertions, 2428 deletions
diff --git a/freetype/src/autofit/aflatin2.c b/freetype/src/autofit/aflatin2.c deleted file mode 100644 index 902f3982..00000000 --- a/freetype/src/autofit/aflatin2.c +++ /dev/null @@ -1,2428 +0,0 @@ -/* ATTENTION: This file doesn't compile. It is only here as a reference */ -/* of an alternative latin hinting algorithm that was always */ -/* marked as experimental. */ - - -/**************************************************************************** - * - * aflatin2.c - * - * Auto-fitter hinting routines for latin writing system (body). - * - * Copyright (C) 2003-2020 by - * David Turner, Robert Wilhelm, and Werner Lemberg. - * - * This file is part of the FreeType project, and may only be used, - * modified, and distributed under the terms of the FreeType project - * license, LICENSE.TXT. By continuing to use, modify, or distribute - * this file you indicate that you have read the license and - * understand and accept it fully. - * - */ - - -#include <freetype/ftadvanc.h> - - -#ifdef FT_OPTION_AUTOFIT2 - -#include "afglobal.h" -#include "aflatin.h" -#include "aflatin2.h" -#include "aferrors.h" - - -#ifdef AF_CONFIG_OPTION_USE_WARPER -#include "afwarp.h" -#endif - - - /************************************************************************** - * - * The macro FT_COMPONENT is used in trace mode. It is an implicit - * parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log - * messages during execution. - */ -#undef FT_COMPONENT -#define FT_COMPONENT aflatin2 - - - FT_LOCAL_DEF( FT_Error ) - af_latin2_hints_compute_segments( AF_GlyphHints hints, - AF_Dimension dim ); - - FT_LOCAL_DEF( void ) - af_latin2_hints_link_segments( AF_GlyphHints hints, - AF_Dimension dim ); - - /*************************************************************************/ - /*************************************************************************/ - /***** *****/ - /***** L A T I N G L O B A L M E T R I C S *****/ - /***** *****/ - /*************************************************************************/ - /*************************************************************************/ - - FT_LOCAL_DEF( void ) - af_latin2_metrics_init_widths( AF_LatinMetrics metrics, - FT_Face face ) - { - /* scan the array of segments in each direction */ - AF_GlyphHintsRec hints[1]; - - - af_glyph_hints_init( hints, face->memory ); - - metrics->axis[AF_DIMENSION_HORZ].width_count = 0; - metrics->axis[AF_DIMENSION_VERT].width_count = 0; - - { - FT_Error error; - FT_UInt glyph_index; - int dim; - AF_LatinMetricsRec dummy[1]; - AF_Scaler scaler = &dummy->root.scaler; - - - glyph_index = FT_Get_Char_Index( - face, - metrics->root.style_class->standard_char ); - if ( glyph_index == 0 ) - goto Exit; - - error = FT_Load_Glyph( face, glyph_index, FT_LOAD_NO_SCALE ); - if ( error || face->glyph->outline.n_points <= 0 ) - goto Exit; - - FT_ZERO( dummy ); - - dummy->units_per_em = metrics->units_per_em; - scaler->x_scale = scaler->y_scale = 0x10000L; - scaler->x_delta = scaler->y_delta = 0; - scaler->face = face; - scaler->render_mode = FT_RENDER_MODE_NORMAL; - scaler->flags = 0; - - af_glyph_hints_rescale( hints, (AF_StyleMetrics)dummy ); - - error = af_glyph_hints_reload( hints, &face->glyph->outline ); - if ( error ) - goto Exit; - - for ( dim = 0; dim < AF_DIMENSION_MAX; dim++ ) - { - AF_LatinAxis axis = &metrics->axis[dim]; - AF_AxisHints axhints = &hints->axis[dim]; - AF_Segment seg, limit, link; - FT_UInt num_widths = 0; - - - error = af_latin2_hints_compute_segments( hints, - (AF_Dimension)dim ); - if ( error ) - goto Exit; - - af_latin2_hints_link_segments( hints, - (AF_Dimension)dim ); - - seg = axhints->segments; - limit = seg + axhints->num_segments; - - for ( ; seg < limit; seg++ ) - { - link = seg->link; - - /* we only consider stem segments there! */ - if ( link && link->link == seg && link > seg ) - { - FT_Pos dist; - - - dist = seg->pos - link->pos; - if ( dist < 0 ) - dist = -dist; - - if ( num_widths < AF_LATIN_MAX_WIDTHS ) - axis->widths[num_widths++].org = dist; - } - } - - af_sort_widths( num_widths, axis->widths ); - axis->width_count = num_widths; - } - - Exit: - for ( dim = 0; dim < AF_DIMENSION_MAX; dim++ ) - { - AF_LatinAxis axis = &metrics->axis[dim]; - FT_Pos stdw; - - - stdw = ( axis->width_count > 0 ) - ? axis->widths[0].org - : AF_LATIN_CONSTANT( metrics, 50 ); - - /* let's try 20% of the smallest width */ - axis->edge_distance_threshold = stdw / 5; - axis->standard_width = stdw; - axis->extra_light = 0; - } - } - - af_glyph_hints_done( hints ); - } - - - -#define AF_LATIN_MAX_TEST_CHARACTERS 12 - - - static const char af_latin2_blue_chars[AF_LATIN_MAX_BLUES] - [AF_LATIN_MAX_TEST_CHARACTERS+1] = - { - "THEZOCQS", - "HEZLOCUS", - "fijkdbh", - "xzroesc", - "xzroesc", - "pqgjy" - }; - - - static void - af_latin2_metrics_init_blues( AF_LatinMetrics metrics, - FT_Face face ) - { - FT_Pos flats [AF_LATIN_MAX_TEST_CHARACTERS]; - FT_Pos rounds[AF_LATIN_MAX_TEST_CHARACTERS]; - FT_Int num_flats; - FT_Int num_rounds; - FT_Int bb; - AF_LatinBlue blue; - FT_Error error; - AF_LatinAxis axis = &metrics->axis[AF_DIMENSION_VERT]; - FT_GlyphSlot glyph = face->glyph; - - - /* we compute the blues simply by loading each character from the */ - /* 'af_latin2_blue_chars[blues]' string, then compute its top-most or */ - /* bottom-most points (depending on `AF_IS_TOP_BLUE') */ - - FT_TRACE5(( "blue zones computation\n" - "======================\n\n" )); - - for ( bb = 0; bb < AF_LATIN_BLUE_MAX; bb++ ) - { - const char* p = af_latin2_blue_chars[bb]; - const char* limit = p + AF_LATIN_MAX_TEST_CHARACTERS; - FT_Pos* blue_ref; - FT_Pos* blue_shoot; - - - FT_TRACE5(( "blue zone %d:\n", bb )); - - num_flats = 0; - num_rounds = 0; - - for ( ; p < limit && *p; p++ ) - { - FT_UInt glyph_index; - FT_Int best_point, best_y, best_first, best_last; - FT_Vector* points; - FT_Bool round; - - - /* load the character in the face -- skip unknown or empty ones */ - glyph_index = FT_Get_Char_Index( face, (FT_UInt)*p ); - if ( glyph_index == 0 ) - continue; - - error = FT_Load_Glyph( face, glyph_index, FT_LOAD_NO_SCALE ); - if ( error || glyph->outline.n_points <= 0 ) - continue; - - /* now compute min or max point indices and coordinates */ - points = glyph->outline.points; - best_point = -1; - best_y = 0; /* make compiler happy */ - best_first = 0; /* ditto */ - best_last = 0; /* ditto */ - - { - FT_Int nn; - FT_Int first = 0; - FT_Int last = -1; - - - for ( nn = 0; nn < glyph->outline.n_contours; first = last+1, nn++ ) - { - FT_Int old_best_point = best_point; - FT_Int pp; - - - last = glyph->outline.contours[nn]; - - /* Avoid single-point contours since they are never rasterized. */ - /* In some fonts, they correspond to mark attachment points */ - /* which are way outside of the glyph's real outline. */ - if ( last <= first ) - continue; - - if ( AF_LATIN_IS_TOP_BLUE( bb ) ) - { - for ( pp = first; pp <= last; pp++ ) - if ( best_point < 0 || points[pp].y > best_y ) - { - best_point = pp; - best_y = points[pp].y; - } - } - else - { - for ( pp = first; pp <= last; pp++ ) - if ( best_point < 0 || points[pp].y < best_y ) - { - best_point = pp; - best_y = points[pp].y; - } - } - - if ( best_point != old_best_point ) - { - best_first = first; - best_last = last; - } - } - FT_TRACE5(( " %c %d", *p, best_y )); - } - - /* now check whether the point belongs to a straight or round */ - /* segment; we first need to find in which contour the extremum */ - /* lies, then inspect its previous and next points */ - if ( best_point >= 0 ) - { - FT_Pos best_x = points[best_point].x; - FT_Int start, end, prev, next; - FT_Pos dist; - - - /* now look for the previous and next points that are not on the */ - /* same Y coordinate. Threshold the `closeness'... */ - start = end = best_point; - - do - { - prev = start - 1; - if ( prev < best_first ) - prev = best_last; - - dist = FT_ABS( points[prev].y - best_y ); - /* accept a small distance or a small angle (both values are */ - /* heuristic; value 20 corresponds to approx. 2.9 degrees) */ - if ( dist > 5 ) - if ( FT_ABS( points[prev].x - best_x ) <= 20 * dist ) - break; - - start = prev; - - } while ( start != best_point ); - - do - { - next = end + 1; - if ( next > best_last ) - next = best_first; - - dist = FT_ABS( points[next].y - best_y ); - if ( dist > 5 ) - if ( FT_ABS( points[next].x - best_x ) <= 20 * dist ) - break; - - end = next; - - } while ( end != best_point ); - - /* now, set the `round' flag depending on the segment's kind */ - round = FT_BOOL( - FT_CURVE_TAG( glyph->outline.tags[start] ) != FT_CURVE_TAG_ON || - FT_CURVE_TAG( glyph->outline.tags[ end ] ) != FT_CURVE_TAG_ON ); - - FT_TRACE5(( " (%s)\n", round ? "round" : "flat" )); - } - - if ( round ) - rounds[num_rounds++] = best_y; - else - flats[num_flats++] = best_y; - } - - if ( num_flats == 0 && num_rounds == 0 ) - { - /* - * we couldn't find a single glyph to compute this blue zone, - * we will simply ignore it then - */ - FT_TRACE5(( " empty\n" )); - continue; - } - - /* we have computed the contents of the `rounds' and `flats' tables, */ - /* now determine the reference and overshoot position of the blue -- */ - /* we simply take the median value after a simple sort */ - af_sort_pos( num_rounds, rounds ); - af_sort_pos( num_flats, flats ); - - blue = & axis->blues[axis->blue_count]; - blue_ref = & blue->ref.org; - blue_shoot = & blue->shoot.org; - - axis->blue_count++; - - if ( num_flats == 0 ) - { - *blue_ref = - *blue_shoot = rounds[num_rounds / 2]; - } - else if ( num_rounds == 0 ) - { - *blue_ref = - *blue_shoot = flats[num_flats / 2]; - } - else - { - *blue_ref = flats[num_flats / 2]; - *blue_shoot = rounds[num_rounds / 2]; - } - - /* there are sometimes problems: if the overshoot position of top */ - /* zones is under its reference position, or the opposite for bottom */ - /* zones. We must thus check everything there and correct the errors */ - if ( *blue_shoot != *blue_ref ) - { - FT_Pos ref = *blue_ref; - FT_Pos shoot = *blue_shoot; - FT_Bool over_ref = FT_BOOL( shoot > ref ); - - - if ( AF_LATIN_IS_TOP_BLUE( bb ) ^ over_ref ) - { - *blue_ref = - *blue_shoot = ( shoot + ref ) / 2; - - FT_TRACE5(( " [overshoot smaller than reference," - " taking mean value]\n" )); - } - } - - blue->flags = 0; - if ( AF_LATIN_IS_TOP_BLUE( bb ) ) - blue->flags |= AF_LATIN_BLUE_TOP; - - /* - * The following flag is used later to adjust the y and x scales - * in order to optimize the pixel grid alignment of the top of small - * letters. - */ - if ( AF_LATIN_IS_X_HEIGHT_BLUE( bb ) ) - blue->flags |= AF_LATIN_BLUE_ADJUSTMENT; - - FT_TRACE5(( " -> reference = %ld\n" - " overshoot = %ld\n", - *blue_ref, *blue_shoot )); - } - - return; - } - - - FT_LOCAL_DEF( void ) - af_latin2_metrics_check_digits( AF_LatinMetrics metrics, - FT_Face face ) - { - FT_UInt i; - FT_Bool started = 0, same_width = 1; - FT_Fixed advance, old_advance = 0; - - - /* check whether all ASCII digits have the same advance width; */ - /* digit `0' is 0x30 in all supported charmaps */ - for ( i = 0x30; i <= 0x39; i++ ) - { - FT_UInt glyph_index; - - - glyph_index = FT_Get_Char_Index( face, i ); - if ( glyph_index == 0 ) - continue; - - if ( FT_Get_Advance( face, glyph_index, - FT_LOAD_NO_SCALE | - FT_LOAD_NO_HINTING | - FT_LOAD_IGNORE_TRANSFORM, - &advance ) ) - continue; - - if ( started ) - { - if ( advance != old_advance ) - { - same_width = 0; - break; - } - } - else - { - old_advance = advance; - started = 1; - } - } - - metrics->root.digits_have_same_width = same_width; - } - - - FT_LOCAL_DEF( FT_Error ) - af_latin2_metrics_init( AF_LatinMetrics metrics, - FT_Face face ) - { - FT_Error error = FT_Err_Ok; - FT_CharMap oldmap = face->charmap; - FT_UInt ee; - - static const FT_Encoding latin_encodings[] = - { - FT_ENCODING_UNICODE, - FT_ENCODING_APPLE_ROMAN, - FT_ENCODING_ADOBE_STANDARD, - FT_ENCODING_ADOBE_LATIN_1, - FT_ENCODING_NONE /* end of list */ - }; - - - metrics->units_per_em = face->units_per_EM; - - /* do we have a latin charmap in there? */ - for ( ee = 0; latin_encodings[ee] != FT_ENCODING_NONE; ee++ ) - { - error = FT_Select_Charmap( face, latin_encodings[ee] ); - if ( !error ) - break; - } - - if ( !error ) - { - af_latin2_metrics_init_widths( metrics, face ); - af_latin2_metrics_init_blues( metrics, face ); - af_latin2_metrics_check_digits( metrics, face ); - } - - FT_Set_Charmap( face, oldmap ); - return FT_Err_Ok; - } - - - static void - af_latin2_metrics_scale_dim( AF_LatinMetrics metrics, - AF_Scaler scaler, - AF_Dimension dim ) - { - FT_Fixed scale; - FT_Pos delta; - AF_LatinAxis axis; - FT_UInt nn; - - - if ( dim == AF_DIMENSION_HORZ ) - { - scale = scaler->x_scale; - delta = scaler->x_delta; - } - else - { - scale = scaler->y_scale; - delta = scaler->y_delta; - } - - axis = &metrics->axis[dim]; - - if ( axis->org_scale == scale && axis->org_delta == delta ) - return; - - axis->org_scale = scale; - axis->org_delta = delta; - - /* - * correct Y scale to optimize the alignment of the top of small - * letters to the pixel grid - */ - if ( dim == AF_DIMENSION_VERT ) - { - AF_LatinAxis vaxis = &metrics->axis[AF_DIMENSION_VERT]; - AF_LatinBlue blue = NULL; - - - for ( nn = 0; nn < vaxis->blue_count; nn++ ) - { - if ( vaxis->blues[nn].flags & AF_LATIN_BLUE_ADJUSTMENT ) - { - blue = &vaxis->blues[nn]; - break; - } - } - - if ( blue ) - { - FT_Pos scaled; - FT_Pos threshold; - FT_Pos fitted; - FT_UInt limit; - FT_UInt ppem; - - - scaled = FT_MulFix( blue->shoot.org, scaler->y_scale ); - ppem = metrics->root.scaler.face->size->metrics.x_ppem; - limit = metrics->root.globals->increase_x_height; - threshold = 40; - - /* if the `increase-x-height' property is active, */ - /* we round up much more often */ - if ( limit && - ppem <= limit && - ppem >= AF_PROP_INCREASE_X_HEIGHT_MIN ) - threshold = 52; - - fitted = ( scaled + threshold ) & ~63; - -#if 1 - if ( scaled != fitted ) - { - scale = FT_MulDiv( scale, fitted, scaled ); - FT_TRACE5(( "== scaled x-top = %.2g" - " fitted = %.2g, scaling = %.4g\n", - scaled / 64.0, fitted / 64.0, - ( fitted * 1.0 ) / scaled )); - } -#endif - } - } - - axis->scale = scale; - axis->delta = delta; - - if ( dim == AF_DIMENSION_HORZ ) - { - metrics->root.scaler.x_scale = scale; - metrics->root.scaler.x_delta = delta; - } - else - { - metrics->root.scaler.y_scale = scale; - metrics->root.scaler.y_delta = delta; - } - - /* scale the standard widths */ - for ( nn = 0; nn < axis->width_count; nn++ ) - { - AF_Width width = axis->widths + nn; - - - width->cur = FT_MulFix( width->org, scale ); - width->fit = width->cur; - } - - /* an extra-light axis corresponds to a standard width that is */ - /* smaller than 5/8 pixels */ - axis->extra_light = - FT_BOOL( FT_MulFix( axis->standard_width, scale ) < 32 + 8 ); - - if ( dim == AF_DIMENSION_VERT ) - { - /* scale the blue zones */ - for ( nn = 0; nn < axis->blue_count; nn++ ) - { - AF_LatinBlue blue = &axis->blues[nn]; - FT_Pos dist; - - - blue->ref.cur = FT_MulFix( blue->ref.org, scale ) + delta; - blue->ref.fit = blue->ref.cur; - blue->shoot.cur = FT_MulFix( blue->shoot.org, scale ) + delta; - blue->shoot.fit = blue->shoot.cur; - blue->flags &= ~AF_LATIN_BLUE_ACTIVE; - - /* a blue zone is only active if it is less than 3/4 pixels tall */ - dist = FT_MulFix( blue->ref.org - blue->shoot.org, scale ); - if ( dist <= 48 && dist >= -48 ) - { - FT_Pos delta1, delta2; - - delta1 = blue->shoot.org - blue->ref.org; - delta2 = delta1; - if ( delta1 < 0 ) - delta2 = -delta2; - - delta2 = FT_MulFix( delta2, scale ); - - if ( delta2 < 32 ) - delta2 = 0; - else if ( delta2 < 64 ) - delta2 = 32 + ( ( ( delta2 - 32 ) + 16 ) & ~31 ); - else - delta2 = FT_PIX_ROUND( delta2 ); - - if ( delta1 < 0 ) - delta2 = -delta2; - - blue->ref.fit = FT_PIX_ROUND( blue->ref.cur ); - blue->shoot.fit = blue->ref.fit + delta2; - - FT_TRACE5(( ">> activating blue zone %d:" - " ref.cur=%.2g ref.fit=%.2g" - " shoot.cur=%.2g shoot.fit=%.2g\n", - nn, blue->ref.cur / 64.0, blue->ref.fit / 64.0, - blue->shoot.cur / 64.0, blue->shoot.fit / 64.0 )); - - blue->flags |= AF_LATIN_BLUE_ACTIVE; - } - } - } - } - - - FT_LOCAL_DEF( void ) - af_latin2_metrics_scale( AF_LatinMetrics metrics, - AF_Scaler scaler ) - { - metrics->root.scaler.render_mode = scaler->render_mode; - metrics->root.scaler.face = scaler->face; - metrics->root.scaler.flags = scaler->flags; - - af_latin2_metrics_scale_dim( metrics, scaler, AF_DIMENSION_HORZ ); - af_latin2_metrics_scale_dim( metrics, scaler, AF_DIMENSION_VERT ); - } - - - /* Extract standard_width from writing system/script specific */ - /* metrics class. */ - - FT_LOCAL_DEF( void ) - af_latin2_get_standard_widths( AF_LatinMetrics metrics, - FT_Pos* stdHW, - FT_Pos* stdVW ) - { - if ( stdHW ) - *stdHW = metrics->axis[AF_DIMENSION_VERT].standard_width; - - if ( stdVW ) - *stdVW = metrics->axis[AF_DIMENSION_HORZ].standard_width; - } - - - /*************************************************************************/ - /*************************************************************************/ - /***** *****/ - /***** L A T I N G L Y P H A N A L Y S I S *****/ - /***** *****/ - /*************************************************************************/ - /*************************************************************************/ - -#define SORT_SEGMENTS - - FT_LOCAL_DEF( FT_Error ) - af_latin2_hints_compute_segments( AF_GlyphHints hints, - AF_Dimension dim ) - { - AF_AxisHints axis = &hints->axis[dim]; - FT_Memory memory = hints->memory; - FT_Error error = FT_Err_Ok; - AF_Segment segment = NULL; - AF_SegmentRec seg0; - AF_Point* contour = hints->contours; - AF_Point* contour_limit = contour + hints->num_contours; - AF_Direction major_dir, segment_dir; - - - FT_ZERO( &seg0 ); - seg0.score = 32000; - seg0.flags = AF_EDGE_NORMAL; - - major_dir = (AF_Direction)FT_ABS( axis->major_dir ); - segment_dir = major_dir; - - axis->num_segments = 0; - - /* set up (u,v) in each point */ - if ( dim == AF_DIMENSION_HORZ ) - { - AF_Point point = hints->points; - AF_Point limit = point + hints->num_points; - - - for ( ; point < limit; point++ ) - { - point->u = point->fx; - point->v = point->fy; - } - } - else - { - AF_Point point = hints->points; - AF_Point limit = point + hints->num_points; - - - for ( ; point < limit; point++ ) - { - point->u = point->fy; - point->v = point->fx; - } - } - - /* do each contour separately */ - for ( ; contour < contour_limit; contour++ ) - { - AF_Point point = contour[0]; - AF_Point start = point; - AF_Point last = point->prev; - - - if ( point == last ) /* skip singletons -- just in case */ - continue; - - /* already on an edge ?, backtrack to find its start */ - if ( FT_ABS( point->in_dir ) == major_dir ) - { - point = point->prev; - - while ( point->in_dir == start->in_dir ) - point = point->prev; - } - else /* otherwise, find first segment start, if any */ - { - while ( FT_ABS( point->out_dir ) != major_dir ) - { - point = point->next; - - if ( point == start ) - goto NextContour; - } - } - - start = point; - - for (;;) - { - AF_Point first; - FT_Pos min_u, min_v, max_u, max_v; - - /* we're at the start of a new segment */ - FT_ASSERT( FT_ABS( point->out_dir ) == major_dir && - point->in_dir != point->out_dir ); - first = point; - - min_u = max_u = point->u; - min_v = max_v = point->v; - - point = point->next; - - while ( point->out_dir == first->out_dir ) - { - point = point->next; - - if ( point->u < min_u ) - min_u = point->u; - - if ( point->u > max_u ) - max_u = point->u; - } - - if ( point->v < min_v ) - min_v = point->v; - - if ( point->v > max_v ) - max_v = point->v; - - /* record new segment */ - error = af_axis_hints_new_segment( axis, memory, &segment ); - if ( error ) - goto Exit; - - segment[0] = seg0; - segment->dir = first->out_dir; - segment->first = first; - segment->last = point; - segment->pos = (FT_Short)( ( min_u + max_u ) >> 1 ); - segment->min_coord = (FT_Short) min_v; - segment->max_coord = (FT_Short) max_v; - segment->height = (FT_Short)( max_v - min_v ); - - /* a segment is round if it doesn't have successive */ - /* on-curve points. */ - { - AF_Point pt = first; - AF_Point last = point; - FT_UInt f0 = pt->flags & AF_FLAG_CONTROL; - FT_UInt f1; - - - segment->flags &= ~AF_EDGE_ROUND; - - for ( ; pt != last; f0 = f1 ) - { - pt = pt->next; - f1 = pt->flags & AF_FLAG_CONTROL; - - if ( !f0 && !f1 ) - break; - - if ( pt == last ) - segment->flags |= AF_EDGE_ROUND; - } - } - - /* this can happen in the case of a degenerate contour - * e.g. a 2-point vertical contour - */ - if ( point == start ) - break; - - /* jump to the start of the next segment, if any */ - while ( FT_ABS( point->out_dir ) != major_dir ) - { - point = point->next; - - if ( point == start ) - goto NextContour; - } - } - - NextContour: - ; - } /* contours */ - - /* now slightly increase the height of segments when this makes */ - /* sense -- this is used to better detect and ignore serifs */ - { - AF_Segment segments = axis->segments; - AF_Segment segments_end = segments + axis->num_segments; - - - for ( segment = segments; segment < segments_end; segment++ ) - { - AF_Point first = segment->first; - AF_Point last = segment->last; - AF_Point p; - FT_Pos first_v = first->v; - FT_Pos last_v = last->v; - - - if ( first_v < last_v ) - { - p = first->prev; - if ( p->v < first_v ) - segment->height = (FT_Short)( segment->height + - ( ( first_v - p->v ) >> 1 ) ); - - p = last->next; - if ( p->v > last_v ) - segment->height = (FT_Short)( segment->height + - ( ( p->v - last_v ) >> 1 ) ); - } - else - { - p = first->prev; - if ( p->v > first_v ) - segment->height = (FT_Short)( segment->height + - ( ( p->v - first_v ) >> 1 ) ); - - p = last->next; - if ( p->v < last_v ) - segment->height = (FT_Short)( segment->height + - ( ( last_v - p->v ) >> 1 ) ); - } - } - } - -#ifdef AF_SORT_SEGMENTS - /* place all segments with a negative direction to the start - * of the array, used to speed up segment linking later... - */ - { - AF_Segment segments = axis->segments; - FT_UInt count = axis->num_segments; - FT_UInt ii, jj; - - for ( ii = 0; ii < count; ii++ ) - { - if ( segments[ii].dir > 0 ) - { - for ( jj = ii + 1; jj < count; jj++ ) - { - if ( segments[jj].dir < 0 ) - { - AF_SegmentRec tmp; - - - tmp = segments[ii]; - segments[ii] = segments[jj]; - segments[jj] = tmp; - - break; - } - } - - if ( jj == count ) - break; - } - } - axis->mid_segments = ii; - } -#endif - - Exit: - return error; - } - - - FT_LOCAL_DEF( void ) - af_latin2_hints_link_segments( AF_GlyphHints hints, - AF_Dimension dim ) - { - AF_AxisHints axis = &hints->axis[dim]; - AF_Segment segments = axis->segments; - AF_Segment segment_limit = segments + axis->num_segments; -#ifdef AF_SORT_SEGMENTS - AF_Segment segment_mid = segments + axis->mid_segments; -#endif - FT_Pos len_threshold, len_score; - AF_Segment seg1, seg2; - - - len_threshold = AF_LATIN_CONSTANT( hints->metrics, 8 ); - if ( len_threshold == 0 ) - len_threshold = 1; - - len_score = AF_LATIN_CONSTANT( hints->metrics, 6000 ); - -#ifdef AF_SORT_SEGMENTS - for ( seg1 = segments; seg1 < segment_mid; seg1++ ) - { - if ( seg1->dir != axis->major_dir ) - continue; - - for ( seg2 = segment_mid; seg2 < segment_limit; seg2++ ) -#else - /* now compare each segment to the others */ - for ( seg1 = segments; seg1 < segment_limit; seg1++ ) - { - if ( seg1->dir != axis->major_dir ) - continue; - - for ( seg2 = segments; seg2 < segment_limit; seg2++ ) - if ( seg1->dir + seg2->dir == 0 && seg2->pos > seg1->pos ) -#endif - { - FT_Pos pos1 = seg1->pos; - FT_Pos pos2 = seg2->pos; - FT_Pos dist = pos2 - pos1; - - - if ( dist < 0 ) - continue; - - { - FT_Pos min = seg1->min_coord; - FT_Pos max = seg1->max_coord; - FT_Pos len, score; - - - if ( min < seg2->min_coord ) - min = seg2->min_coord; - - if ( max > seg2->max_coord ) - max = seg2->max_coord; - - len = max - min; - if ( len >= len_threshold ) - { - score = dist + len_score / len; - if ( score < seg1->score ) - { - seg1->score = score; - seg1->link = seg2; - } - - if ( score < seg2->score ) - { - seg2->score = score; - seg2->link = seg1; - } - } - } - } - } -#if 0 - } -#endif - - /* now, compute the `serif' segments */ - for ( seg1 = segments; seg1 < segment_limit; seg1++ ) - { - seg2 = seg1->link; - - if ( seg2 ) - { - if ( seg2->link != seg1 ) - { - seg1->link = NULL; - seg1->serif = seg2->link; - } - } - } - } - - - FT_LOCAL_DEF( FT_Error ) - af_latin2_hints_compute_edges( AF_GlyphHints hints, - AF_Dimension dim ) - { - AF_AxisHints axis = &hints->axis[dim]; - FT_Error error = FT_Err_Ok; - FT_Memory memory = hints->memory; - AF_LatinAxis laxis = &((AF_LatinMetrics)hints->metrics)->axis[dim]; - - AF_Segment segments = axis->segments; - AF_Segment segment_limit = segments + axis->num_segments; - AF_Segment seg; - - AF_Direction up_dir; - FT_Fixed scale; - FT_Pos edge_distance_threshold; - FT_Pos segment_length_threshold; - - - axis->num_edges = 0; - - scale = ( dim == AF_DIMENSION_HORZ ) ? hints->x_scale - : hints->y_scale; - - up_dir = ( dim == AF_DIMENSION_HORZ ) ? AF_DIR_UP - : AF_DIR_RIGHT; - - /* - * We want to ignore very small (mostly serif) segments, we do that - * by ignoring those that whose length is less than a given fraction - * of the standard width. If there is no standard width, we ignore - * those that are less than a given size in pixels - * - * also, unlink serif segments that are linked to segments farther - * than 50% of the standard width - */ - if ( dim == AF_DIMENSION_HORZ ) - { - if ( laxis->width_count > 0 ) - segment_length_threshold = ( laxis->standard_width * 10 ) >> 4; - else - segment_length_threshold = FT_DivFix( 64, hints->y_scale ); - } - else - segment_length_threshold = 0; - - /********************************************************************** - * - * We will begin by generating a sorted table of edges for the - * current direction. To do so, we simply scan each segment and try - * to find an edge in our table that corresponds to its position. - * - * If no edge is found, we create and insert a new edge in the - * sorted table. Otherwise, we simply add the segment to the edge's - * list which will be processed in the second step to compute the - * edge's properties. - * - * Note that the edges table is sorted along the segment/edge - * position. - * - */ - - edge_distance_threshold = FT_MulFix( laxis->edge_distance_threshold, - scale ); - if ( edge_distance_threshold > 64 / 4 ) - edge_distance_threshold = 64 / 4; - - edge_distance_threshold = FT_DivFix( edge_distance_threshold, - scale ); - - for ( seg = segments; seg < segment_limit; seg++ ) - { - AF_Edge found = NULL; - FT_Int ee; - - - if ( seg->height < segment_length_threshold ) - continue; - - /* A special case for serif edges: If they are smaller than */ - /* 1.5 pixels we ignore them. */ - if ( seg->serif ) - { - FT_Pos dist = seg->serif->pos - seg->pos; - - - if ( dist < 0 ) - dist = -dist; - - if ( dist >= laxis->standard_width >> 1 ) - { - /* unlink this serif, it is too distant from its reference stem */ - seg->serif = NULL; - } - else if ( 2*seg->height < 3 * segment_length_threshold ) - continue; - } - - /* look for an edge corresponding to the segment */ - for ( ee = 0; ee < axis->num_edges; ee++ ) - { - AF_Edge edge = axis->edges + ee; - FT_Pos dist; - - - dist = seg->pos - edge->fpos; - if ( dist < 0 ) - dist = -dist; - - if ( dist < edge_distance_threshold && edge->dir == seg->dir ) - { - found = edge; - break; - } - } - - if ( !found ) - { - AF_Edge edge; - - - /* insert a new edge in the list and */ - /* sort according to the position */ - error = af_axis_hints_new_edge( axis, seg->pos, seg->dir, 0, - memory, &edge ); - if ( error ) - goto Exit; - - /* add the segment to the new edge's list */ - FT_ZERO( edge ); - - edge->first = seg; - edge->last = seg; - edge->dir = seg->dir; - edge->fpos = seg->pos; - edge->opos = FT_MulFix( seg->pos, scale ); - edge->pos = edge->opos; - seg->edge_next = seg; - } - else - { - /* if an edge was found, simply add the segment to the edge's */ - /* list */ - seg->edge_next = found->first; - found->last->edge_next = seg; - found->last = seg; - } - } - - - /********************************************************************** - * - * Good, we will now compute each edge's properties according to - * segments found on its position. Basically, these are: - * - * - edge's main direction - * - stem edge, serif edge or both (which defaults to stem then) - * - rounded edge, straight or both (which defaults to straight) - * - link for edge - * - */ - - /* first of all, set the `edge' field in each segment -- this is */ - /* required in order to compute edge links */ - - /* - * Note that removing this loop and setting the `edge' field of each - * segment directly in the code above slows down execution speed for - * some reasons on platforms like the Sun. - */ - { - AF_Edge edges = axis->edges; - AF_Edge edge_limit = edges + axis->num_edges; - AF_Edge edge; - - - for ( edge = edges; edge < edge_limit; edge++ ) - { - seg = edge->first; - if ( seg ) - do - { - seg->edge = edge; - seg = seg->edge_next; - - } while ( seg != edge->first ); - } - - /* now, compute each edge properties */ - for ( edge = edges; edge < edge_limit; edge++ ) - { - FT_Int is_round = 0; /* does it contain round segments? */ - FT_Int is_straight = 0; /* does it contain straight segments? */ -#if 0 - FT_Pos ups = 0; /* number of upwards segments */ - FT_Pos downs = 0; /* number of downwards segments */ -#endif - - - seg = edge->first; - - do - { - FT_Bool is_serif; - - - /* check for roundness of segment */ - if ( seg->flags & AF_EDGE_ROUND ) - is_round++; - else - is_straight++; - -#if 0 - /* check for segment direction */ - if ( seg->dir == up_dir ) - ups += seg->max_coord-seg->min_coord; - else - downs += seg->max_coord-seg->min_coord; -#endif - - /* check for links -- if seg->serif is set, then seg->link must */ - /* be ignored */ - is_serif = FT_BOOL( seg->serif && - seg->serif->edge && - seg->serif->edge != edge ); - - if ( ( seg->link && seg->link->edge ) || is_serif ) - { - AF_Edge edge2; - AF_Segment seg2; - - - edge2 = edge->link; - seg2 = seg->link; - - if ( is_serif ) - { - seg2 = seg->serif; - edge2 = edge->serif; - } - - if ( edge2 ) - { - FT_Pos edge_delta; - FT_Pos seg_delta; - - - edge_delta = edge->fpos - edge2->fpos; - if ( edge_delta < 0 ) - edge_delta = -edge_delta; - - seg_delta = seg->pos - seg2->pos; - if ( seg_delta < 0 ) - seg_delta = -seg_delta; - - if ( seg_delta < edge_delta ) - edge2 = seg2->edge; - } - else - edge2 = seg2->edge; - - if ( is_serif ) - { - edge->serif = edge2; - edge2->flags |= AF_EDGE_SERIF; - } - else - edge->link = edge2; - } - - seg = seg->edge_next; - - } while ( seg != edge->first ); - - /* set the round/straight flags */ - edge->flags = AF_EDGE_NORMAL; - - if ( is_round > 0 && is_round >= is_straight ) - edge->flags |= AF_EDGE_ROUND; - -#if 0 - /* set the edge's main direction */ - edge->dir = AF_DIR_NONE; - - if ( ups > downs ) - edge->dir = (FT_Char)up_dir; - - else if ( ups < downs ) - edge->dir = (FT_Char)-up_dir; - - else if ( ups == downs ) - edge->dir = 0; /* both up and down! */ -#endif - - /* gets rid of serifs if link is set */ - /* XXX: This gets rid of many unpleasant artefacts! */ - /* Example: the `c' in cour.pfa at size 13 */ - - if ( edge->serif && edge->link ) - edge->serif = NULL; - } - } - - Exit: - return error; - } - - - FT_LOCAL_DEF( FT_Error ) - af_latin2_hints_detect_features( AF_GlyphHints hints, - AF_Dimension dim ) - { - FT_Error error; - - - error = af_latin2_hints_compute_segments( hints, dim ); - if ( !error ) - { - af_latin2_hints_link_segments( hints, dim ); - - error = af_latin2_hints_compute_edges( hints, dim ); - } - return error; - } - - - static void - af_latin2_hints_compute_blue_edges( AF_GlyphHints hints, - AF_LatinMetrics metrics ) - { - AF_AxisHints axis = &hints->axis[AF_DIMENSION_VERT]; - AF_Edge edge = axis->edges; - AF_Edge edge_limit = edge + axis->num_edges; - AF_LatinAxis latin = &metrics->axis[AF_DIMENSION_VERT]; - FT_Fixed scale = latin->scale; - FT_Pos best_dist0; /* initial threshold */ - - - /* compute the initial threshold as a fraction of the EM size */ - best_dist0 = FT_MulFix( metrics->units_per_em / 40, scale ); - - if ( best_dist0 > 64 / 2 ) - best_dist0 = 64 / 2; - - /* compute which blue zones are active, i.e. have their scaled */ - /* size < 3/4 pixels */ - - /* for each horizontal edge search the blue zone which is closest */ - for ( ; edge < edge_limit; edge++ ) - { - FT_Int bb; - AF_Width best_blue = NULL; - FT_Pos best_dist = best_dist0; - - for ( bb = 0; bb < AF_LATIN_BLUE_MAX; bb++ ) - { - AF_LatinBlue blue = latin->blues + bb; - FT_Bool is_top_blue, is_major_dir; - - - /* skip inactive blue zones (i.e., those that are too small) */ - if ( !( blue->flags & AF_LATIN_BLUE_ACTIVE ) ) - continue; - - /* if it is a top zone, check for right edges -- if it is a bottom */ - /* zone, check for left edges */ - /* */ - /* of course, that's for TrueType */ - is_top_blue = (FT_Byte)( ( blue->flags & AF_LATIN_BLUE_TOP ) != 0 ); - is_major_dir = FT_BOOL( edge->dir == axis->major_dir ); - - /* if it is a top zone, the edge must be against the major */ - /* direction; if it is a bottom zone, it must be in the major */ - /* direction */ - if ( is_top_blue ^ is_major_dir ) - { - FT_Pos dist; - AF_Width compare; - - - /* if it's a rounded edge, compare it to the overshoot position */ - /* if it's a flat edge, compare it to the reference position */ - if ( edge->flags & AF_EDGE_ROUND ) - compare = &blue->shoot; - else - compare = &blue->ref; - - dist = edge->fpos - compare->org; - if ( dist < 0 ) - dist = -dist; - - dist = FT_MulFix( dist, scale ); - if ( dist < best_dist ) - { - best_dist = dist; - best_blue = compare; - } - -#if 0 - /* now, compare it to the overshoot position if the edge is */ - /* rounded, and if the edge is over the reference position of a */ - /* top zone, or under the reference position of a bottom zone */ - if ( edge->flags & AF_EDGE_ROUND && dist != 0 ) - { - FT_Bool is_under_ref = FT_BOOL( edge->fpos < blue->ref.org ); - - - if ( is_top_blue ^ is_under_ref ) - { - blue = latin->blues + bb; - dist = edge->fpos - blue->shoot.org; - if ( dist < 0 ) - dist = -dist; - - dist = FT_MulFix( dist, scale ); - if ( dist < best_dist ) - { - best_dist = dist; - best_blue = & blue->shoot; - } - } - } -#endif - } - } - - if ( best_blue ) - edge->blue_edge = best_blue; - } - } - - - static FT_Error - af_latin2_hints_init( AF_GlyphHints hints, - AF_LatinMetrics metrics ) - { - FT_Render_Mode mode; - FT_UInt32 scaler_flags, other_flags; - FT_Face face = metrics->root.scaler.face; - - - af_glyph_hints_rescale( hints, (AF_StyleMetrics)metrics ); - - /* - * correct x_scale and y_scale if needed, since they may have - * been modified `af_latin2_metrics_scale_dim' above - */ - hints->x_scale = metrics->axis[AF_DIMENSION_HORZ].scale; - hints->x_delta = metrics->axis[AF_DIMENSION_HORZ].delta; - hints->y_scale = metrics->axis[AF_DIMENSION_VERT].scale; - hints->y_delta = metrics->axis[AF_DIMENSION_VERT].delta; - - /* compute flags depending on render mode, etc. */ - mode = metrics->root.scaler.render_mode; - -#if 0 /* #ifdef AF_CONFIG_OPTION_USE_WARPER */ - if ( mode == FT_RENDER_MODE_LCD || mode == FT_RENDER_MODE_LCD_V ) - metrics->root.scaler.render_mode = mode = FT_RENDER_MODE_NORMAL; -#endif - - scaler_flags = hints->scaler_flags; - other_flags = 0; - - /* - * We snap the width of vertical stems for the monochrome and - * horizontal LCD rendering targets only. - */ - if ( mode == FT_RENDER_MODE_MONO || mode == FT_RENDER_MODE_LCD ) - other_flags |= AF_LATIN_HINTS_HORZ_SNAP; - - /* - * We snap the width of horizontal stems for the monochrome and - * vertical LCD rendering targets only. - */ - if ( mode == FT_RENDER_MODE_MONO || mode == FT_RENDER_MODE_LCD_V ) - other_flags |= AF_LATIN_HINTS_VERT_SNAP; - - /* - * We adjust stems to full pixels unless in `light' or `lcd' mode. - */ - if ( mode != FT_RENDER_MODE_LIGHT && mode != FT_RENDER_MODE_LCD ) - other_flags |= AF_LATIN_HINTS_STEM_ADJUST; - - if ( mode == FT_RENDER_MODE_MONO ) - other_flags |= AF_LATIN_HINTS_MONO; - - /* - * In `light' or `lcd' mode we disable horizontal hinting completely. - * We also do it if the face is italic. - */ - if ( mode == FT_RENDER_MODE_LIGHT || mode == FT_RENDER_MODE_LCD || - ( face->style_flags & FT_STYLE_FLAG_ITALIC ) != 0 ) - scaler_flags |= AF_SCALER_FLAG_NO_HORIZONTAL; - -#ifdef AF_CONFIG_OPTION_USE_WARPER - /* get (global) warper flag */ - if ( !metrics->root.globals->module->warping ) - scaler_flags |= AF_SCALER_FLAG_NO_WARPER; -#endif - - hints->scaler_flags = scaler_flags; - hints->other_flags = other_flags; - - return 0; - } - - - /*************************************************************************/ - /*************************************************************************/ - /***** *****/ - /***** L A T I N G L Y P H G R I D - F I T T I N G *****/ - /***** *****/ - /*************************************************************************/ - /*************************************************************************/ - - /* snap a given width in scaled coordinates to one of the */ - /* current standard widths */ - - static FT_Pos - af_latin2_snap_width( AF_Width widths, - FT_UInt count, - FT_Pos width ) - { - FT_UInt n; - FT_Pos best = 64 + 32 + 2; - FT_Pos reference = width; - FT_Pos scaled; - - - for ( n = 0; n < count; n++ ) - { - FT_Pos w; - FT_Pos dist; - - - w = widths[n].cur; - dist = width - w; - if ( dist < 0 ) - dist = -dist; - if ( dist < best ) - { - best = dist; - reference = w; - } - } - - scaled = FT_PIX_ROUND( reference ); - - if ( width >= reference ) - { - if ( width < scaled + 48 ) - width = reference; - } - else - { - if ( width > scaled - 48 ) - width = reference; - } - - return width; - } - - - /* compute the snapped width of a given stem */ - - static FT_Pos - af_latin2_compute_stem_width( AF_GlyphHints hints, - AF_Dimension dim, - FT_Pos width, - FT_UInt base_flags, - FT_UInt stem_flags ) - { - AF_LatinMetrics metrics = (AF_LatinMetrics) hints->metrics; - AF_LatinAxis axis = & metrics->axis[dim]; - FT_Pos dist = width; - FT_Int sign = 0; - FT_Int vertical = ( dim == AF_DIMENSION_VERT ); - - FT_UNUSED( base_flags ); - - - if ( !AF_LATIN_HINTS_DO_STEM_ADJUST( hints ) || - axis->extra_light ) - return width; - - if ( dist < 0 ) - { - dist = -width; - sign = 1; - } - - if ( ( vertical && !AF_LATIN_HINTS_DO_VERT_SNAP( hints ) ) || - ( !vertical && !AF_LATIN_HINTS_DO_HORZ_SNAP( hints ) ) ) - { - /* smooth hinting process: very lightly quantize the stem width */ - - /* leave the widths of serifs alone */ - - if ( ( stem_flags & AF_EDGE_SERIF ) && vertical && ( dist < 3 * 64 ) ) - goto Done_Width; - -#if 0 - else if ( ( base_flags & AF_EDGE_ROUND ) ) - { - if ( dist < 80 ) - dist = 64; - } - else if ( dist < 56 ) - dist = 56; -#endif - if ( axis->width_count > 0 ) - { - FT_Pos delta; - - - /* compare to standard width */ - if ( axis->width_count > 0 ) - { - delta = dist - axis->widths[0].cur; - - if ( delta < 0 ) - delta = -delta; - - if ( delta < 40 ) - { - dist = axis->widths[0].cur; - if ( dist < 48 ) - dist = 48; - - goto Done_Width; - } - } - - if ( dist < 3 * 64 ) - { - delta = dist & 63; - dist &= -64; - - if ( delta < 10 ) - dist += delta; - - else if ( delta < 32 ) - dist += 10; - - else if ( delta < 54 ) - dist += 54; - - else - dist += delta; - } - else - dist = ( dist + 32 ) & ~63; - } - } - else - { - /* strong hinting process: snap the stem width to integer pixels */ - FT_Pos org_dist = dist; - - - dist = af_latin2_snap_width( axis->widths, axis->width_count, dist ); - - if ( vertical ) - { - /* in the case of vertical hinting, always round */ - /* the stem heights to integer pixels */ - - if ( dist >= 64 ) - dist = ( dist + 16 ) & ~63; - else - dist = 64; - } - else - { - if ( AF_LATIN_HINTS_DO_MONO( hints ) ) - { - /* monochrome horizontal hinting: snap widths to integer pixels */ - /* with a different threshold */ - - if ( dist < 64 ) - dist = 64; - else - dist = ( dist + 32 ) & ~63; - } - else - { - /* for horizontal anti-aliased hinting, we adopt a more subtle */ - /* approach: we strengthen small stems, round stems whose size */ - /* is between 1 and 2 pixels to an integer, otherwise nothing */ - - if ( dist < 48 ) - dist = ( dist + 64 ) >> 1; - - else if ( dist < 128 ) - { - /* We only round to an integer width if the corresponding */ - /* distortion is less than 1/4 pixel. Otherwise this */ - /* makes everything worse since the diagonals, which are */ - /* not hinted, appear a lot bolder or thinner than the */ - /* vertical stems. */ - - FT_Int delta; - - - dist = ( dist + 22 ) & ~63; - delta = dist - org_dist; - if ( delta < 0 ) - delta = -delta; - - if ( delta >= 16 ) - { - dist = org_dist; - if ( dist < 48 ) - dist = ( dist + 64 ) >> 1; - } - } - else - /* round otherwise to prevent color fringes in LCD mode */ - dist = ( dist + 32 ) & ~63; - } - } - } - - Done_Width: - if ( sign ) - dist = -dist; - - return dist; - } - - - /* align one stem edge relative to the previous stem edge */ - - static void - af_latin2_align_linked_edge( AF_GlyphHints hints, - AF_Dimension dim, - AF_Edge base_edge, - AF_Edge stem_edge ) - { - FT_Pos dist = stem_edge->opos - base_edge->opos; - - FT_Pos fitted_width = af_latin2_compute_stem_width( hints, dim, dist, - base_edge->flags, - stem_edge->flags ); - - - stem_edge->pos = base_edge->pos + fitted_width; - - FT_TRACE5(( "LINK: edge %d (opos=%.2f) linked to (%.2f), " - "dist was %.2f, now %.2f\n", - stem_edge-hints->axis[dim].edges, stem_edge->opos / 64.0, - stem_edge->pos / 64.0, dist / 64.0, fitted_width / 64.0 )); - } - - - static void - af_latin2_align_serif_edge( AF_GlyphHints hints, - AF_Edge base, - AF_Edge serif ) - { - FT_UNUSED( hints ); - - serif->pos = base->pos + ( serif->opos - base->opos ); - } - - - /*************************************************************************/ - /*************************************************************************/ - /*************************************************************************/ - /**** ****/ - /**** E D G E H I N T I N G ****/ - /**** ****/ - /*************************************************************************/ - /*************************************************************************/ - /*************************************************************************/ - - - static void - af_latin2_hint_edges( AF_GlyphHints hints, - AF_Dimension dim ) - { - AF_AxisHints axis = &hints->axis[dim]; - AF_Edge edges = axis->edges; - AF_Edge edge_limit = edges + axis->num_edges; - AF_Edge edge; - AF_Edge anchor = NULL; - FT_Int has_serifs = 0; - FT_Pos anchor_drift = 0; - - - - FT_TRACE5(( "==== hinting %s edges =====\n", - dim == AF_DIMENSION_HORZ ? "vertical" : "horizontal" )); - - /* we begin by aligning all stems relative to the blue zone */ - /* if needed -- that's only for horizontal edges */ - - if ( dim == AF_DIMENSION_VERT && AF_HINTS_DO_BLUES( hints ) ) - { - for ( edge = edges; edge < edge_limit; edge++ ) - { - AF_Width blue; - AF_Edge edge1, edge2; - - - if ( edge->flags & AF_EDGE_DONE ) - continue; - - blue = edge->blue_edge; - edge1 = NULL; - edge2 = edge->link; - - if ( blue ) - { - edge1 = edge; - } - else if ( edge2 && edge2->blue_edge ) - { - blue = edge2->blue_edge; - edge1 = edge2; - edge2 = edge; - } - - if ( !edge1 ) - continue; - - FT_TRACE5(( "BLUE: edge %d (opos=%.2f) snapped to (%.2f), " - "was (%.2f)\n", - edge1-edges, edge1->opos / 64.0, blue->fit / 64.0, - edge1->pos / 64.0 )); - - edge1->pos = blue->fit; - edge1->flags |= AF_EDGE_DONE; - - if ( edge2 && !edge2->blue_edge ) - { - af_latin2_align_linked_edge( hints, dim, edge1, edge2 ); - edge2->flags |= AF_EDGE_DONE; - } - - if ( !anchor ) - { - anchor = edge; - - anchor_drift = ( anchor->pos - anchor->opos ); - if ( edge2 ) - anchor_drift = ( anchor_drift + - ( edge2->pos - edge2->opos ) ) >> 1; - } - } - } - - /* now we will align all stem edges, trying to maintain the */ - /* relative order of stems in the glyph */ - for ( edge = edges; edge < edge_limit; edge++ ) - { - AF_Edge edge2; - - - if ( edge->flags & AF_EDGE_DONE ) - continue; - - /* skip all non-stem edges */ - edge2 = edge->link; - if ( !edge2 ) - { - has_serifs++; - continue; - } - - /* now align the stem */ - - /* this should not happen, but it's better to be safe */ - if ( edge2->blue_edge ) - { - FT_TRACE5(( "ASSERTION FAILED for edge %d\n", edge2-edges )); - - af_latin2_align_linked_edge( hints, dim, edge2, edge ); - edge->flags |= AF_EDGE_DONE; - continue; - } - - if ( !anchor ) - { - FT_Pos org_len, org_center, cur_len; - FT_Pos cur_pos1, error1, error2, u_off, d_off; - - - org_len = edge2->opos - edge->opos; - cur_len = af_latin2_compute_stem_width( hints, dim, org_len, - edge->flags, - edge2->flags ); - if ( cur_len <= 64 ) - u_off = d_off = 32; - else - { - u_off = 38; - d_off = 26; - } - - if ( cur_len < 96 ) - { - org_center = edge->opos + ( org_len >> 1 ); - - cur_pos1 = FT_PIX_ROUND( org_center ); - - error1 = org_center - ( cur_pos1 - u_off ); - if ( error1 < 0 ) - error1 = -error1; - - error2 = org_center - ( cur_pos1 + d_off ); - if ( error2 < 0 ) - error2 = -error2; - - if ( error1 < error2 ) - cur_pos1 -= u_off; - else - cur_pos1 += d_off; - - edge->pos = cur_pos1 - cur_len / 2; - edge2->pos = edge->pos + cur_len; - } - else - edge->pos = FT_PIX_ROUND( edge->opos ); - - FT_TRACE5(( "ANCHOR: edge %d (opos=%.2f) and %d (opos=%.2f)" - " snapped to (%.2f) (%.2f)\n", - edge-edges, edge->opos / 64.0, - edge2-edges, edge2->opos / 64.0, - edge->pos / 64.0, edge2->pos / 64.0 )); - anchor = edge; - - edge->flags |= AF_EDGE_DONE; - - af_latin2_align_linked_edge( hints, dim, edge, edge2 ); - - edge2->flags |= AF_EDGE_DONE; - - anchor_drift = ( ( anchor->pos - anchor->opos ) + - ( edge2->pos - edge2->opos ) ) >> 1; - - FT_TRACE5(( "DRIFT: %.2f\n", anchor_drift/64.0 )); - } - else - { - FT_Pos org_pos, org_len, org_center, cur_center, cur_len; - FT_Pos org_left, org_right; - - - org_pos = edge->opos + anchor_drift; - org_len = edge2->opos - edge->opos; - org_center = org_pos + ( org_len >> 1 ); - - cur_len = af_latin2_compute_stem_width( hints, dim, org_len, - edge->flags, - edge2->flags ); - - org_left = org_pos + ( ( org_len - cur_len ) >> 1 ); - org_right = org_pos + ( ( org_len + cur_len ) >> 1 ); - - FT_TRACE5(( "ALIGN: left=%.2f right=%.2f ", - org_left / 64.0, org_right / 64.0 )); - cur_center = org_center; - - if ( edge2->flags & AF_EDGE_DONE ) - { - FT_TRACE5(( "\n" )); - edge->pos = edge2->pos - cur_len; - } - else - { - /* we want to compare several displacement, and choose - * the one that increases fitness while minimizing - * distortion as well - */ - FT_Pos displacements[6], scores[6], org, fit, delta; - FT_UInt count = 0; - - /* note: don't even try to fit tiny stems */ - if ( cur_len < 32 ) - { - FT_TRACE5(( "tiny stem\n" )); - goto AlignStem; - } - - /* if the span is within a single pixel, don't touch it */ - if ( FT_PIX_FLOOR( org_left ) == FT_PIX_CEIL( org_right ) ) - { - FT_TRACE5(( "single pixel stem\n" )); - goto AlignStem; - } - - if ( cur_len <= 96 ) - { - /* we want to avoid the absolute worst case which is - * when the left and right edges of the span each represent - * about 50% of the gray. we'd better want to change this - * to 25/75%, since this is much more pleasant to the eye with - * very acceptable distortion - */ - FT_Pos frac_left = org_left & 63; - FT_Pos frac_right = org_right & 63; - - if ( frac_left >= 22 && frac_left <= 42 && - frac_right >= 22 && frac_right <= 42 ) - { - org = frac_left; - fit = ( org <= 32 ) ? 16 : 48; - delta = FT_ABS( fit - org ); - displacements[count] = fit - org; - scores[count++] = delta; - FT_TRACE5(( "dispA=%.2f (%d) ", ( fit - org ) / 64.0, delta )); - - org = frac_right; - fit = ( org <= 32 ) ? 16 : 48; - delta = FT_ABS( fit - org ); - displacements[count] = fit - org; - scores[count++] = delta; - FT_TRACE5(( "dispB=%.2f (%d) ", ( fit - org ) / 64.0, delta )); - } - } - - /* snapping the left edge to the grid */ - org = org_left; - fit = FT_PIX_ROUND( org ); - delta = FT_ABS( fit - org ); - displacements[count] = fit - org; - scores[count++] = delta; - FT_TRACE5(( "dispC=%.2f (%d) ", ( fit - org ) / 64.0, delta )); - - /* snapping the right edge to the grid */ - org = org_right; - fit = FT_PIX_ROUND( org ); - delta = FT_ABS( fit - org ); - displacements[count] = fit - org; - scores[count++] = delta; - FT_TRACE5(( "dispD=%.2f (%d) ", ( fit - org ) / 64.0, delta )); - - /* now find the best displacement */ - { - FT_Pos best_score = scores[0]; - FT_Pos best_disp = displacements[0]; - FT_UInt nn; - - for ( nn = 1; nn < count; nn++ ) - { - if ( scores[nn] < best_score ) - { - best_score = scores[nn]; - best_disp = displacements[nn]; - } - } - - cur_center = org_center + best_disp; - } - FT_TRACE5(( "\n" )); - } - - AlignStem: - edge->pos = cur_center - ( cur_len >> 1 ); - edge2->pos = edge->pos + cur_len; - - FT_TRACE5(( "STEM1: %d (opos=%.2f) to %d (opos=%.2f)" - " snapped to (%.2f) and (%.2f)," - " org_len=%.2f cur_len=%.2f\n", - edge-edges, edge->opos / 64.0, - edge2-edges, edge2->opos / 64.0, - edge->pos / 64.0, edge2->pos / 64.0, - org_len / 64.0, cur_len / 64.0 )); - - edge->flags |= AF_EDGE_DONE; - edge2->flags |= AF_EDGE_DONE; - - if ( edge > edges && edge->pos < edge[-1].pos ) - { - FT_TRACE5(( "BOUND: %d (pos=%.2f) to (%.2f)\n", - edge-edges, edge->pos / 64.0, edge[-1].pos / 64.0 )); - edge->pos = edge[-1].pos; - } - } - } - - /* make sure that lowercase m's maintain their symmetry */ - - /* In general, lowercase m's have six vertical edges if they are sans */ - /* serif, or twelve if they are with serifs. This implementation is */ - /* based on that assumption, and seems to work very well with most */ - /* faces. However, if for a certain face this assumption is not */ - /* true, the m is just rendered like before. In addition, any stem */ - /* correction will only be applied to symmetrical glyphs (even if the */ - /* glyph is not an m), so the potential for unwanted distortion is */ - /* relatively low. */ - - /* We don't handle horizontal edges since we can't easily assure that */ - /* the third (lowest) stem aligns with the base line; it might end up */ - /* one pixel higher or lower. */ - -#if 0 - { - FT_Int n_edges = edge_limit - edges; - - - if ( dim == AF_DIMENSION_HORZ && ( n_edges == 6 || n_edges == 12 ) ) - { - AF_Edge edge1, edge2, edge3; - FT_Pos dist1, dist2, span, delta; - - - if ( n_edges == 6 ) - { - edge1 = edges; - edge2 = edges + 2; - edge3 = edges + 4; - } - else - { - edge1 = edges + 1; - edge2 = edges + 5; - edge3 = edges + 9; - } - - dist1 = edge2->opos - edge1->opos; - dist2 = edge3->opos - edge2->opos; - - span = dist1 - dist2; - if ( span < 0 ) - span = -span; - - if ( span < 8 ) - { - delta = edge3->pos - ( 2 * edge2->pos - edge1->pos ); - edge3->pos -= delta; - if ( edge3->link ) - edge3->link->pos -= delta; - - /* move the serifs along with the stem */ - if ( n_edges == 12 ) - { - ( edges + 8 )->pos -= delta; - ( edges + 11 )->pos -= delta; - } - - edge3->flags |= AF_EDGE_DONE; - if ( edge3->link ) - edge3->link->flags |= AF_EDGE_DONE; - } - } - } -#endif - - if ( has_serifs || !anchor ) - { - /* - * now hint the remaining edges (serifs and single) in order - * to complete our processing - */ - for ( edge = edges; edge < edge_limit; edge++ ) - { - FT_Pos delta; - - - if ( edge->flags & AF_EDGE_DONE ) - continue; - - delta = 1000; - - if ( edge->serif ) - { - delta = edge->serif->opos - edge->opos; - if ( delta < 0 ) - delta = -delta; - } - - if ( delta < 64 + 16 ) - { - af_latin2_align_serif_edge( hints, edge->serif, edge ); - FT_TRACE5(( "SERIF: edge %d (opos=%.2f) serif to %d (opos=%.2f)" - " aligned to (%.2f)\n", - edge-edges, edge->opos / 64.0, - edge->serif - edges, edge->serif->opos / 64.0, - edge->pos / 64.0 )); - } - else if ( !anchor ) - { - FT_TRACE5(( "SERIF_ANCHOR: edge %d (opos=%.2f)" - " snapped to (%.2f)\n", - edge-edges, edge->opos / 64.0, edge->pos / 64.0 )); - edge->pos = FT_PIX_ROUND( edge->opos ); - anchor = edge; - } - else - { - AF_Edge before, after; - - - for ( before = edge - 1; before >= edges; before-- ) - if ( before->flags & AF_EDGE_DONE ) - break; - - for ( after = edge + 1; after < edge_limit; after++ ) - if ( after->flags & AF_EDGE_DONE ) - break; - - if ( before >= edges && before < edge && - after < edge_limit && after > edge ) - { - if ( after->opos == before->opos ) - edge->pos = before->pos; - else - edge->pos = before->pos + - FT_MulDiv( edge->opos - before->opos, - after->pos - before->pos, - after->opos - before->opos ); - FT_TRACE5(( "SERIF_LINK1: edge %d (opos=%.2f) snapped to (%.2f)" - " from %d (opos=%.2f)\n", - edge-edges, edge->opos / 64.0, edge->pos / 64.0, - before - edges, before->opos / 64.0 )); - } - else - { - edge->pos = anchor->pos + - ( ( edge->opos - anchor->opos + 16 ) & ~31 ); - - FT_TRACE5(( "SERIF_LINK2: edge %d (opos=%.2f)" - " snapped to (%.2f)\n", - edge-edges, edge->opos / 64.0, edge->pos / 64.0 )); - } - } - - edge->flags |= AF_EDGE_DONE; - - if ( edge > edges && edge->pos < edge[-1].pos ) - edge->pos = edge[-1].pos; - - if ( edge + 1 < edge_limit && - edge[1].flags & AF_EDGE_DONE && - edge->pos > edge[1].pos ) - edge->pos = edge[1].pos; - } - } - } - - - static FT_Error - af_latin2_hints_apply( FT_UInt glyph_index, - AF_GlyphHints hints, - FT_Outline* outline, - AF_LatinMetrics metrics ) - { - FT_Error error; - int dim; - - FT_UNUSED( glyph_index ); - - - error = af_glyph_hints_reload( hints, outline ); - if ( error ) - goto Exit; - - /* analyze glyph outline */ - if ( AF_HINTS_DO_HORIZONTAL( hints ) ) - { - error = af_latin2_hints_detect_features( hints, AF_DIMENSION_HORZ ); - if ( error ) - goto Exit; - } - - if ( AF_HINTS_DO_VERTICAL( hints ) ) - { - error = af_latin2_hints_detect_features( hints, AF_DIMENSION_VERT ); - if ( error ) - goto Exit; - - af_latin2_hints_compute_blue_edges( hints, metrics ); - } - - /* grid-fit the outline */ - for ( dim = 0; dim < AF_DIMENSION_MAX; dim++ ) - { -#ifdef AF_CONFIG_OPTION_USE_WARPER - if ( dim == AF_DIMENSION_HORZ && - metrics->root.scaler.render_mode == FT_RENDER_MODE_NORMAL && - AF_HINTS_DO_WARP( hints ) ) - { - AF_WarperRec warper; - FT_Fixed scale; - FT_Pos delta; - - - af_warper_compute( &warper, hints, dim, &scale, &delta ); - af_glyph_hints_scale_dim( hints, dim, scale, delta ); - continue; - } -#endif /* AF_CONFIG_OPTION_USE_WARPER */ - - if ( ( dim == AF_DIMENSION_HORZ && AF_HINTS_DO_HORIZONTAL( hints ) ) || - ( dim == AF_DIMENSION_VERT && AF_HINTS_DO_VERTICAL( hints ) ) ) - { - af_latin2_hint_edges( hints, (AF_Dimension)dim ); - af_glyph_hints_align_edge_points( hints, (AF_Dimension)dim ); - af_glyph_hints_align_strong_points( hints, (AF_Dimension)dim ); - af_glyph_hints_align_weak_points( hints, (AF_Dimension)dim ); - } - } - af_glyph_hints_save( hints, outline ); - - Exit: - return error; - } - - - /*************************************************************************/ - /*************************************************************************/ - /***** *****/ - /***** L A T I N S C R I P T C L A S S *****/ - /***** *****/ - /*************************************************************************/ - /*************************************************************************/ - - - AF_DEFINE_WRITING_SYSTEM_CLASS( - af_latin2_writing_system_class, - - AF_WRITING_SYSTEM_LATIN2, - - sizeof ( AF_LatinMetricsRec ), - - (AF_WritingSystem_InitMetricsFunc) af_latin2_metrics_init, /* style_metrics_init */ - (AF_WritingSystem_ScaleMetricsFunc)af_latin2_metrics_scale, /* style_metrics_scale */ - (AF_WritingSystem_DoneMetricsFunc) NULL, /* style_metrics_done */ - (AF_WritingSystem_GetStdWidthsFunc)af_latin2_get_standard_widths, /* style_metrics_getstdw */ - - (AF_WritingSystem_InitHintsFunc) af_latin2_hints_init, /* style_hints_init */ - (AF_WritingSystem_ApplyHintsFunc) af_latin2_hints_apply /* style_hints_apply */ - ) - -#else /* !FT_OPTION_AUTOFIT2 */ - - /* ANSI C doesn't like empty source files */ - typedef int _af_latin2_dummy; - -#endif /* !FT_OPTION_AUTOFIT2 */ - - -/* END */ |