net-wireless/hostapd: drop old 2.6-r1

2.6-r4 is the new stable revision.

Package-Manager: Portage-2.3.40, Repoman-2.3.9

1 files changed, 0 insertions, 226 deletions

diff --git a/net-wireless/hostapd/hostapd-2.6-r1.ebuild b/net-wireless/hostapd/hostapd-2.6-r1.ebuild
deleted file mode 100644
index 8a0d613bea7d..000000000000
--- a/net-wireless/hostapd/hostapd-2.6-r1.ebuild
+++ /dev/null
@@ -1,226 +0,0 @@
-# Copyright 1999-2018 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI="6"
-
-inherit toolchain-funcs eutils systemd
-
-# bogus commit to force manifest regeneration #596462
-
-DESCRIPTION="IEEE 802.11 wireless LAN Host AP daemon"
-HOMEPAGE="http://hostap.epitest.fi"
-SRC_URI="http://hostap.epitest.fi/releases/${P}.tar.gz"
-
-LICENSE="BSD"
-SLOT="0"
-KEYWORDS="amd64 ~arm ~mips ppc x86"
-IUSE="ipv6 logwatch netlink sqlite +ssl +wps +crda"
-
-DEPEND="ssl? ( dev-libs/openssl:*[-bindist] )
-	kernel_linux? (
-		dev-libs/libnl:3
-		crda? ( net-wireless/crda )
-	)
-	netlink? ( net-libs/libnfnetlink )
-	sqlite? ( >=dev-db/sqlite-3 )"
-
-RDEPEND="${DEPEND}"
-
-S="${S}/${PN}"
-
-src_prepare() {
-	# Allow users to apply patches to src/drivers for example,
-	# i.e. anything outside ${S}/${PN}
-	pushd ../ >/dev/null || die
-	# https://w1.fi/security/2017-1/wpa-packet-number-reuse-with-replayed-messages.txt
-	eapply "${FILESDIR}/2017-1/rebased-v2.6-0001-hostapd-Avoid-key-reinstallation-in-FT-handshake.patch"
-	eapply "${FILESDIR}/2017-1/rebased-v2.6-0002-Prevent-reinstallation-of-an-already-in-use-group-ke.patch"
-	eapply "${FILESDIR}/2017-1/rebased-v2.6-0003-Extend-protection-of-GTK-IGTK-reinstallation-of-WNM-.patch"
-	eapply "${FILESDIR}/2017-1/rebased-v2.6-0004-Prevent-installation-of-an-all-zero-TK.patch"
-	eapply "${FILESDIR}/2017-1/rebased-v2.6-0005-Fix-PTK-rekeying-to-generate-a-new-ANonce.patch"
-	eapply "${FILESDIR}/2017-1/rebased-v2.6-0006-TDLS-Reject-TPK-TK-reconfiguration.patch"
-	eapply "${FILESDIR}/2017-1/rebased-v2.6-0008-FT-Do-not-allow-multiple-Reassociation-Response-fram.patch"
-	default
-	popd >/dev/null || die
-
-	sed -i -e "s:/etc/hostapd:/etc/hostapd/hostapd:g" \
-		"${S}/hostapd.conf" || die
-
-}
-
-src_configure() {
-	local CONFIG="${S}/.config"
-
-	# toolchain setup
-	echo "CC = $(tc-getCC)" > ${CONFIG}
-
-	# EAP authentication methods
-	echo "CONFIG_EAP=y" >> ${CONFIG}
-	echo "CONFIG_ERP=y" >> ${CONFIG}
-	echo "CONFIG_EAP_MD5=y" >> ${CONFIG}
-
-	if use ssl; then
-		# SSL authentication methods
-		echo "CONFIG_EAP_FAST=y" >> ${CONFIG}
-		echo "CONFIG_EAP_TLS=y" >> ${CONFIG}
-		echo "CONFIG_EAP_TTLS=y" >> ${CONFIG}
-		echo "CONFIG_EAP_MSCHAPV2=y" >> ${CONFIG}
-		echo "CONFIG_EAP_PEAP=y" >> ${CONFIG}
-		echo "CONFIG_TLSV11=y" >> ${CONFIG}
-		echo "CONFIG_TLSV12=y" >> ${CONFIG}
-	fi
-
-	if use wps; then
-		# Enable Wi-Fi Protected Setup
-		echo "CONFIG_WPS=y" >> ${CONFIG}
-		echo "CONFIG_WPS2=y" >> ${CONFIG}
-		echo "CONFIG_WPS_UPNP=y" >> ${CONFIG}
-		echo "CONFIG_WPS_NFC=y" >> ${CONFIG}
-		einfo "Enabling Wi-Fi Protected Setup support"
-	fi
-
-	echo "CONFIG_EAP_IKEV2=y" >> ${CONFIG}
-	echo "CONFIG_EAP_TNC=y" >> ${CONFIG}
-	echo "CONFIG_EAP_GTC=y" >> ${CONFIG}
-	echo "CONFIG_EAP_SIM=y" >> ${CONFIG}
-	echo "CONFIG_EAP_AKA=y" >> ${CONFIG}
-	echo "CONFIG_EAP_AKA_PRIME=y" >> ${CONFIG}
-	echo "CONFIG_EAP_EKE=y" >> ${CONFIG}
-	echo "CONFIG_EAP_PAX=y" >> ${CONFIG}
-	echo "CONFIG_EAP_PSK=y" >> ${CONFIG}
-	echo "CONFIG_EAP_SAKE=y" >> ${CONFIG}
-	echo "CONFIG_EAP_GPSK=y" >> ${CONFIG}
-	echo "CONFIG_EAP_GPSK_SHA256=y" >> ${CONFIG}
-	echo "CONFIG_EAP_PWD=y" >> ${CONFIG}
-
-	einfo "Enabling drivers: "
-
-	# drivers
-	echo "CONFIG_DRIVER_HOSTAP=y" >> ${CONFIG}
-	einfo "  HostAP driver enabled"
-	echo "CONFIG_DRIVER_WIRED=y" >> ${CONFIG}
-	einfo "  Wired driver enabled"
-	echo "CONFIG_DRIVER_PRISM54=y" >> ${CONFIG}
-	einfo "  Prism54 driver enabled"
-	echo "CONFIG_DRIVER_NONE=y" >> ${CONFIG}
-	einfo "  None driver enabled"
-
-	einfo "  nl80211 driver enabled"
-	echo "CONFIG_DRIVER_NL80211=y" >> ${CONFIG}
-
-	# epoll
-	echo "CONFIG_ELOOP_EPOLL=y" >> ${CONFIG}
-
-	# misc
-	echo "CONFIG_DEBUG_FILE=y" >> ${CONFIG}
-	echo "CONFIG_PKCS12=y" >> ${CONFIG}
-	echo "CONFIG_RADIUS_SERVER=y" >> ${CONFIG}
-	echo "CONFIG_IAPP=y" >> ${CONFIG}
-	echo "CONFIG_IEEE80211R=y" >> ${CONFIG}
-	echo "CONFIG_IEEE80211W=y" >> ${CONFIG}
-	echo "CONFIG_IEEE80211N=y" >> ${CONFIG}
-	echo "CONFIG_IEEE80211AC=y" >> ${CONFIG}
-	echo "CONFIG_PEERKEY=y" >> ${CONFIG}
-	echo "CONFIG_RSN_PREAUTH=y" >> ${CONFIG}
-	echo "CONFIG_INTERWORKING=y" >> ${CONFIG}
-	echo "CONFIG_FULL_DYNAMIC_VLAN=y" >> ${CONFIG}
-	echo "CONFIG_HS20=y" >> ${CONFIG}
-	echo "CONFIG_WNM=y" >> ${CONFIG}
-	echo "CONFIG_FST=y" >> ${CONFIG}
-	echo "CONFIG_FST_TEST=y" >> ${CONFIG}
-	echo "CONFIG_ACS=y" >> ${CONFIG}
-
-	if use netlink; then
-		# Netlink support
-		echo "CONFIG_VLAN_NETLINK=y" >> ${CONFIG}
-	fi
-
-	if use ipv6; then
-		# IPv6 support
-		echo "CONFIG_IPV6=y" >> ${CONFIG}
-	fi
-
-	if use sqlite; then
-		# Sqlite support
-		echo "CONFIG_SQLITE=y" >> ${CONFIG}
-	fi
-
-	# If we are using libnl 2.0 and above, enable support for it
-	# Removed for now, since the 3.2 version is broken, and we don't
-	# support it.
-	if has_version ">=dev-libs/libnl-3.2"; then
-		echo "CONFIG_LIBNL32=y" >> .config
-	fi
-
-	# TODO: Add support for BSD drivers
-
-	default_src_configure
-}
-
-src_compile() {
-	emake V=1
-
-	if use ssl; then
-		emake V=1 nt_password_hash
-		emake V=1 hlr_auc_gw
-	fi
-}
-
-src_install() {
-	insinto /etc/${PN}
-	doins ${PN}.{conf,accept,deny,eap_user,radius_clients,sim_db,wpa_psk}
-
-	fperms -R 600 /etc/${PN}
-
-	dosbin ${PN}
-	dobin ${PN}_cli
-
-	use ssl && dobin nt_password_hash hlr_auc_gw
-
-	newinitd "${FILESDIR}"/${PN}-init.d ${PN}
-	newconfd "${FILESDIR}"/${PN}-conf.d ${PN}
-	systemd_dounit "${FILESDIR}"/${PN}.service
-
-	doman ${PN}{.8,_cli.1}
-
-	dodoc ChangeLog README
-	use wps && dodoc README-WPS
-
-	docinto examples
-	dodoc wired.conf
-
-	if use logwatch; then
-		insinto /etc/log.d/conf/services/
-		doins logwatch/${PN}.conf
-
-		exeinto /etc/log.d/scripts/services/
-		doexe logwatch/${PN}
-	fi
-}
-
-pkg_postinst() {
-	einfo
-	einfo "If you are running openRC you need to follow this instructions:"
-	einfo "In order to use ${PN} you need to set up your wireless card"
-	einfo "for master mode in /etc/conf.d/net and then start"
-	einfo "/etc/init.d/${PN}."
-	einfo
-	einfo "Example configuration:"
-	einfo
-	einfo "config_wlan0=( \"192.168.1.1/24\" )"
-	einfo "channel_wlan0=\"6\""
-	einfo "essid_wlan0=\"test\""
-	einfo "mode_wlan0=\"master\""
-	einfo
-	#if [ -e "${KV_DIR}"/net/mac80211 ]; then
-	#	einfo "This package now compiles against the headers installed by"
-	#	einfo "the kernel source for the mac80211 driver. You should "
-	#	einfo "re-emerge ${PN} after upgrading your kernel source."
-	#fi
-
-	if use wps; then
-		einfo "You have enabled Wi-Fi Protected Setup support, please"
-		einfo "read the README-WPS file in /usr/share/doc/${P}"
-		einfo "for info on how to use WPS"
-	fi
-}